職位描述
該職位信息待核驗,請仔細了解后再進行投遞!
崗位職責:
負責車身域Adaptive Autosar Classic Autosar的SOA軟件平臺化方案構建,包括功能分配,子系統和控制器方案,并基于軟件平臺,進行車身域控器(含BCM、PEPS、空調、網關、天窗等)功能的子系統和應用開發,包括如下:
Responsible for the construction of SOA software platform solution of Adaptive Autosar Classic Autosar in the body domain controller, including function allocation, subsystem and controller scheme, and subsystem and application development of the functions of the body domain controller (including BCM, PEPS, air conditioning, gateway, skylight, etc.) based on the software platform. Include the following:
1.產品架構的落地,編寫產品架構實施需求
Product architecture implementation, writing product architecture requirements.
2.協助硬件進行硬件架構設計、選型,關鍵方案制定(芯片、電路、EMC、射頻、功耗等)
Assist hardware in hardware architecture design, selection, and formulation of key solutions (chip, circuit, EMC, RF, power consumption, etc.) activities.
3.軟件架構的需求分析、技術研究、概念方案設計
Software architecture requirements analysis, technical research, conceptual scheme design.
4.產品發展規劃及新技術研究
Product development planning and new technology research.
5.產品算力分配、部署,指導和推動各環節方案實施落地
Product computing power distribution, deployment, guidance and promote the implementation of all aspects of the plan.
6.完成上級領導臨時布置的相關工作
Complete the work temporarily arranged by the superior leadership.
崗位要求:
五年以上汽車行業軟件開發經驗,熟悉汽車行業標準和規范;
Five or more years of experience in software development in the automotive industry, familiar with automotive industry standards and specifications;
精通C/C 語言基礎,擁有較強的嵌入式系統調試能力.
Proficient in C/C language foundation, with strong debugging ability of embedded system.
熟悉嵌入式系統平臺開發,如FreeRTOS,Autosar OS等,熟悉多線程下軟件開發方法.
Familiar with embedded system platform development, such as FreeRTOS, Autosar OS, etc., familiar with multi-threaded software development methods.
熟悉AutoSAR AP/CP軟件架構,車載網絡CAN, LIN,以太網,域控制器OTA,診斷,Boot等.
Familiar with AutoSAR AP/CP software architecture, vehicle network CAN, LIN, Ethernet, domain controller OTA, diagnostics, Boot, etc.
至少2個GW、PEPS/BCM/車身域控制器/Tbox開發項目經驗,熟悉GW、BCM、PEPS等功能,熟悉高低頻定位算法.
At least 2 GW, PEPS/BCM/ body domain controller /Tbox development project experience, familiar with GW, BCM and other functions, familiar with high/low frequency positioning algorithm.
有Autosar架構下的MATLAB、Simulink、stateflow及嵌入式編碼的經驗優化.
Experience in MATLAB, Simulink, stateflow and embedded coding under Autosar architecture.
有基于多核異構SoC,完成Adaptive Autosar軟件平臺的配置開發經驗的優先.
Experiences with Adaptive Autosar software platform configuration and development based on multi-core heterogeneous SoC.
有AUTTOSAR AP架構下中間件開發的經驗優先
Experiences with AUTTOSAR AP architecture middleware development is a plus.
有汽車網絡安全和功能安全經驗者優先.
Experiences with cyber secrity and functional safety is a plus.
有 ASPICE 經驗者優先.
Experiences with ASPICE is a plus.
有軟件項目管理經驗者優先.
Experiences with software project management is a plus.
本科及以上學歷 Bachelor’s degree or above
良好的英語書面、口語溝通能力。兼具德語能力者優先。 Fluent written and spoken English. German language skills is a plus。
負責車身域Adaptive Autosar Classic Autosar的SOA軟件平臺化方案構建,包括功能分配,子系統和控制器方案,并基于軟件平臺,進行車身域控器(含BCM、PEPS、空調、網關、天窗等)功能的子系統和應用開發,包括如下:
Responsible for the construction of SOA software platform solution of Adaptive Autosar Classic Autosar in the body domain controller, including function allocation, subsystem and controller scheme, and subsystem and application development of the functions of the body domain controller (including BCM, PEPS, air conditioning, gateway, skylight, etc.) based on the software platform. Include the following:
1.產品架構的落地,編寫產品架構實施需求
Product architecture implementation, writing product architecture requirements.
2.協助硬件進行硬件架構設計、選型,關鍵方案制定(芯片、電路、EMC、射頻、功耗等)
Assist hardware in hardware architecture design, selection, and formulation of key solutions (chip, circuit, EMC, RF, power consumption, etc.) activities.
3.軟件架構的需求分析、技術研究、概念方案設計
Software architecture requirements analysis, technical research, conceptual scheme design.
4.產品發展規劃及新技術研究
Product development planning and new technology research.
5.產品算力分配、部署,指導和推動各環節方案實施落地
Product computing power distribution, deployment, guidance and promote the implementation of all aspects of the plan.
6.完成上級領導臨時布置的相關工作
Complete the work temporarily arranged by the superior leadership.
崗位要求:
五年以上汽車行業軟件開發經驗,熟悉汽車行業標準和規范;
Five or more years of experience in software development in the automotive industry, familiar with automotive industry standards and specifications;
精通C/C 語言基礎,擁有較強的嵌入式系統調試能力.
Proficient in C/C language foundation, with strong debugging ability of embedded system.
熟悉嵌入式系統平臺開發,如FreeRTOS,Autosar OS等,熟悉多線程下軟件開發方法.
Familiar with embedded system platform development, such as FreeRTOS, Autosar OS, etc., familiar with multi-threaded software development methods.
熟悉AutoSAR AP/CP軟件架構,車載網絡CAN, LIN,以太網,域控制器OTA,診斷,Boot等.
Familiar with AutoSAR AP/CP software architecture, vehicle network CAN, LIN, Ethernet, domain controller OTA, diagnostics, Boot, etc.
至少2個GW、PEPS/BCM/車身域控制器/Tbox開發項目經驗,熟悉GW、BCM、PEPS等功能,熟悉高低頻定位算法.
At least 2 GW, PEPS/BCM/ body domain controller /Tbox development project experience, familiar with GW, BCM and other functions, familiar with high/low frequency positioning algorithm.
有Autosar架構下的MATLAB、Simulink、stateflow及嵌入式編碼的經驗優化.
Experience in MATLAB, Simulink, stateflow and embedded coding under Autosar architecture.
有基于多核異構SoC,完成Adaptive Autosar軟件平臺的配置開發經驗的優先.
Experiences with Adaptive Autosar software platform configuration and development based on multi-core heterogeneous SoC.
有AUTTOSAR AP架構下中間件開發的經驗優先
Experiences with AUTTOSAR AP architecture middleware development is a plus.
有汽車網絡安全和功能安全經驗者優先.
Experiences with cyber secrity and functional safety is a plus.
有 ASPICE 經驗者優先.
Experiences with ASPICE is a plus.
有軟件項目管理經驗者優先.
Experiences with software project management is a plus.
本科及以上學歷 Bachelor’s degree or above
良好的英語書面、口語溝通能力。兼具德語能力者優先。 Fluent written and spoken English. German language skills is a plus。
工作地點
地址:成都成都經開區(龍泉驛區)均勝集團清逸路99號5號樓7樓
??
點擊查看地圖
詳細位置,可以參考上方地址信息
求職提示:用人單位發布虛假招聘信息,或以任何名義向求職者收取財物(如體檢費、置裝費、押金、服裝費、培訓費、身份證、畢業證等),均涉嫌違法,請求職者務必提高警惕。
職位發布者
HR
寧波普瑞均勝汽車電子有限公司
-
汽車·摩托車
-
200-499人
-
股份制企業
-
高新區聚賢路1266號

應屆畢業生
學歷不限
最近更新
2575人關注
注:聯系我時,請說是在四川人才網上看到的。
